viernes, 30 de enero de 2015

Phase 5: Placement and structure of the greenhouse.


The structure of the greenhouse, as he appeared in the previous sketch, it has been designed for an as practical as possible assembly. It is clear of 5 arches that they will be those who shape the structure and that will join with lateral bars for those who foresaw a few hookings in the arches frontal and back for his placement.


After placing the arches frontal and back, that have joined with some lateral bars to measure and to present the structure, place other three interior arches, which have held themselves with wire, for the present in a provisional way in order that it allows his mobility.


Later, there are placed the vertical bars that will sustain the structure and will delimit his height. For it, we will have to realize holes in the ground because the hardness of the same one did not allow, in the first attempt, to fix them since we were designed.


We sharpen the banes with the radial one to facilitate his introduction in the ground, and we proceeded to clear, first, the area of the greenhouse removing and transplanting some trees and hedges that were in the zone.


We proceeded to measure accurately the location of 5 pops that will sustain the structure to realize differently the holes with the sufficient depth that allows us to adapt them to the structure of the greenhouse and to placing the lateral bars that give the necessary consistency up to obtaining the tool that allows us to fix the props.


To comment that we have had many problems with the weather, since though in any photos it does not seem, during the dates of assembly we suffer continuously bad weather followed several who did not allow us to construct the greenhouse as we wanted since it was becoming impossible to be employed at such conditions, having to delay very much his construction and take advantage of spaces of the day in which the snow, the rain and the intense wind were giving us small rests.


We fix the structure to the ground, compacting well with stones and land in order that the subordination is very strong. We did this because Monterroso's weather is extreme and, in numerous occasions, there take place strong winds, rains, etc. That might demolish the structure in case it was not fixed well and anchored to the ground.



              Later, we fix the lateral bars to the arches of the greenhouse. For it, first, we measure in each of them the distance to the first arch, to support the equivalent distance during the whole path of the bar, repeating the same step in all of them.


We reinforce also with wire the hooking of the frontal and back arches with the bars to prevent them to fall down, in the same way that we did previously in the central arches, to complete, finally, the structure.



No hay comentarios:

Publicar un comentario